Care And Maintenance - Kobra FLEXPACK Betriebsanleitung

Cardboard can be processed up to a maximum width of 427 mm. If cardboard is larger than
427 mm, the machine will automatically cut the excessive part of the cardboard off.
By adjusting the working width scale (1) [Pic.2], it is possible to adjust the width of the cut
cardboard according to the user's needs.
WARNING!
When using the machine, avoid
repeated forward and reverse
operations as this could cause
jammings, blocking the exit of the
processed cardboard material that
will only get freed by a manual
extraction of the cardboard.
In case of a jam, move the switch (A)
[Pic.2] to the "R" position and take
out the material from the front feed
opening. Then, completely clean the
back exit by manually pulling out the
jammed material [Pic.3].
Using the machine with the cardboard
outlet clogged or blocked will
damage the mechanical components.
Before doing any maintanance or repairs or
touching the internal parts of the machine,
unplug the cable from the power supply.
CARDBOARD FEEDING
a

CARE AND MAINTENANCE

KOBRA FLEXPACK desktop
KOBRA Flexpack desktop does not need
maintenance or special care.
A
B
Pic. 2
Pic. 3
11