Kobra FLEXPACK Betriebsanleitung Seite 9

underestimate the risks associated with the
use of this machine and concentrate on the
work you are doing in order to avoid material
damage.
Risks connected with the use of the
machine
Even though the KOBRA Flexpack desktop
cannot be considered
dangerous device, never underestimate the
risks connected with its use, even though
the manufacturer, by installing all the safety
features in order to make the machine safe
to use, guarantees its compliance with safety
regulations.
Verbal instruction on how to use the machine
for each operator who will be responsible for
using and carrying out maintenance on the
machine does not exonerate the user from
reading the user and maintenance manual.
Electrical hazard
Any work on the electrical parts of the
machine may only be carried out by
specialised personnel authorised by the
manufacturer. If maintenance is carried out
by external personnel, it is necessary to verify
that the operator has had specific training in
the maintenance of electrical systems and
appliances, must know the location of power
lines and keep a certain distance from them,
and when the work is completed must issue
a certificate of compliance.
Live working is prohibited.
Unless they have gone through special
training, those authorised to operate the
Flexpack desktop may never carry out any
type of maintenance.
Do not make changes of any kind to the
electrical parts of the machine. Any attempt
to do so may compromise the operation of
electrical devices and cause malfunctions or
accidents and will void the warranty.
a particularly
KOBRA FLEXPACK desktop
Warnings
• If you hear any strange noises or notice
anything strange, switch off the machine and
immediately notify the person in charge who
will set maintenance procedures in motion.
• Never interfere with moving parts while the
machine is in operation.
• Take the utmost care at every stage of the
operations in order to avoid injury or damage
to things or to the machine itself.
• When the work is finished, clean the work
area and, the with machine switched off,
remove any residual debris.
• Before switching off the machine, check if
it is working properly so that other operators
do not find the machine in less than perfect
working order the next time it is used.
• Check that technicians only use original
spare parts.
• The KOBRA Flexpack desktop is intended
for a specific application, do not use it to do
shredding work for which it is not designed
for (cardboard only).
• When the KOBRA Flexpack desktop is idle
for long periods of time, unplug it from the
power socket.
• Work stations must be kept clean and tidy.
Untidiness can cause accident and injury.
IMPORTANT - Personal protection should
be worn when operating the machine:
hearing protection, protective gloves and
safety glasses.
9