EFI Fiery proServer Installationshandbuch Seite 8

Brightness Enables you to adjust the brightness of the Fiery QuickTouch LCD. You can also use this command to
dim the display when it is inactive.
Start the Fiery proServer
After installing the Fiery proServer hardware, and connecting it to the printer and network, you are ready to turn the
Fiery proServer on.
1 Set the power switch on the back of the Fiery proServer to the On (|) position.
2 Power on the Fiery proServer.
Press once and release the button to power on the system. The power supply automatically senses the correct
voltage.
3 At the Admin logon on the monitor, enter Fiery.1 in the password field, and then press Enter.
Type Fiery.1 exactly. The password is case-sensitive; for example, fiery.1 will not work.
4 Allow startup to proceed until the Fiery proServer desktop appears on the monitor, and Fiery QuickTouch
displays Idle.
The Fiery proServer takes approximately two minutes to start up. If you are starting Fiery proServer for the first
time, you are required to license the Fiery XF server as part of the installation procedure. For more information,
see Activate the Fiery XF server license
By default, the Windows taskbar is hidden.
The taskbar contains:
•
Fiery Server Control, a separate application for starting and stopping the Fiery XF server, starting Fiery
Command WorkStation, managing licenses, and accessing software updates and media profiles.
•
Fiery System Tools, a tool for changing the language of all Fiery proServer hardware and software
components, and for backing up and restoring the Fiery proServer system.
5 To display the Windows taskbar, do one of the following:
•
To display the taskbar momentarily, move the mouse pointer to the bottom of the screen.
•
To display the taskbar at all times, right-click the taskbar and then click Settings. On the Taskbar tab, set Lock
the taskbar to on, and Automatically hide the taskbar in desktop mode to off.
Shut down the Fiery proServer
The Fiery proServer must be in an Idle state when you turn it off.
1 Verify that Command WorkStation is not receiving, processing, or printing any jobs.
If the system has just finished processing, wait at least five seconds after the system reaches Idle before you
proceed.
2 Exit Command WorkStation. On the File menu, click Exit
3 On the Fiery QuickTouch main menu, press Shutdown system.
Allow the system to shut down completely.
All manuals and user guides at all-guides.com
on page 10 .
Installation Guide 8
Fiery proServer, version 7.1