EFI Fiery proServer Installationshandbuch Seite 12

10 Click OK, and close all windows.
11 If applicable, at the printer, configure the printer network settings with the static IP address that you set up.
You can now connect to the printer from the Fiery proServer and from the prepress network.
Delete a network bridge
You can delete a dedicated connection that you no longer need.
1 In Control Panel, click Network and Internet. Then click Network and Sharing Center and Change adapter
settings.
2 Right-click the Network Bridge icon, and select Delete.
3 Click Yes to confirm that you want to delete the connection.
Downloading documentation
You can access and download all Fiery proServer documentation at any time.
The Fiery proServer documentation consists of the following components:
•
The Installation Guide (this document) describes how to install and connect the Fiery proServer and activate the
license
It is provided as a printed copy in multiple languages in the accessory box and also online.
•
The Setup Guide describes how to configure Command WorkStation and keep your Fiery proServer in good
working condition.
It is provided online in multiple languages.
•
The Quick Start Guide is a step-by-step guide on how to use Command WorkStation in your daily work with
your EFI inkjet printer.
It is provided as a printed copy in the accessory box (English only), and is also available online in multiple
languages.
•
The Upgrade Guide describes how to upgrade from an earlier version of the software.
It is provided online in multiple languages.
1 Double-click the Adobe icon on the Fiery proServer desktop to open the Adobe website and download Adobe
Reader.
You need Adobe Reader in order to access the Fiery proServer documentation, which is provided in PDF format.
2 Open the web browser of your choice, and go to help.efi.com.
3 Click the links for your product version and language, and download the latest documentation.
All manuals and user guides at all-guides.com
Installation Guide 12
Fiery proServer, version 7.1