Dometic RML9336 Montageanleitung Seite 15

RML9336
5.4 Installing the ventilation grille
No. in
fig. 9, page 5
1
2
3
4
➤ Proceed as shown (fig. 0, page 5 to fig. b, page 5).
5.5 Install the roof vent
No. in
fig. c, page 6
1
2
➤ Proceed as shown (fig. d, page 6 to fig. e, page 6).
5.6 Install the flue duct
I
NOTE
Do not install an additional flue stack, as this leads to poor performance
and increases the power consumption of the refrigerator.
The flue duct is installed at the factory. Follow these steps when you have removed
the flue duct and want to reinstall it (fig. f, page 6):
➤ Place the T-piece (1) on the flue pipe (2).
➤ Direct the T-piece at an angle of 45° towards the rear wall.
➤ Attach the T-piece, adaptor and flue pipe with a screw (3).
EN
Description
Installation frame
Ventilation grille
Winter cover
Slider
Description
Installation frame
Hood
Installing the refrigerator
15