Dometic EA24B Montage- Und Bedienungsanleitung Seite 30

Troubleshooting
Fault
The device switches
itself on and off.
The interior LED
lamp does not
work.
The device vibrates. The device is not properly
30
Possible cause
The room temperature is higher
than specified in the technical
data (seechapter "Technical data"
on page 34).
The device was recently replen-
ished with new food.
The door was opened frequently. ➤ Do not open the door more
The door was not closed prop-
erly.
The door is not hermetically
sealed.
The device is not connected to a
power supply.
The circuit breaker tripped.
The fuse has blown.
The interior LED lamp was
switched off via the control panel.
aligned.
EA24B, EA24D
Remedy
➤ Put the device in a cooler
place (see chapter "Moving
the device" on page 27).
➤ Allow the device to work for a
while until the set tempera-
ture has been reached.
often than necessary.
➤ Close door properly.
➤ Check the door seal and clean
it.
➤ If necessary, contact an autho-
rized service agent to replace
the seal.
➤ Connect the device (see
chapter "Connecting the
device to the power supply"
on page 23).
➤ Switch on the circuit breaker.
➤ Replace the fuse.
➤ Switch on the interior LED
lamp (see chapter "Switching
the light on/off" on page 26).
➤ Align out the device with the
adjustable feet (see chapter
"Adjusting the feet" on
page 23).
EN