Pahlen 125821 Benutzerhandbuch Seite 8

Outlet
For the pool framework made of wood, metal or plastic - finished with liner
Item No. 125821 Classic
Install as below:
1. Make a hole in the frame according to the template and mount the flange with the
supplied screws and mounting plate on the pool inside (see diagram).
2. Fix self-adhesive packing (t = 1,5mm) onto the flange.
3. Install the pool liner and begin flooding.
4. When the water reaches around 5 cm below the outlet nozzle, cut a small cross in the liner in the
center of the nozzle hole. Install packing (t = 2mm) and sealing.
5. Trim the liner below the sealing inside edge.
6. Install the front with Pahlén logo on top.
7. Fill the pool with water up to the desired level.
Pool frame
plywood/sheet
Countersunk
Mounting
screw
washer
M5x30 (4 pcs)
K ( 1 : 1 )
K ( 1 : 1 )
Wall mat
Pool framework
Wall mat
Liner
Flange
Self-adhesive packing t=1,5 mm
Inloppsmunstycke / Inlet
Sugmunstycke / Outlet
Spa-belysning / Spa light
Poolstomme
Dimension drawing for holes in pool wall
Liner
Universalfläns

78
Sugmunstycke

6 (4x)
Classic 40
Ytbehandling
E
Generell tolerans
ISO 2768-1
Installationsbild tunnvägg
Box 728, SE-194 27 Upplands Väsby, Sweden
Phone +46 8 59411050, Fax +46 8 59086880
Sugmunstycke
Classic 40
Sealing ring
Countersunk screw M5x16 (6 pcs)
Front
Countersunk screw
M5x20 (2 pcs)
Plastic washer
Packing t=2 mm
8
ENGLISH
Poolstomme
Liner & packningar
Sugmunstycke
UP

UP
4,25
Universalfläns
13
51
51
Ritad av Datum Godkänd av Datum
PD 2020-10-23
Artikelnummer
Skala Storlek
1 : 2 A2
NOTE! Not 1:1 scale
Ritningsnummer Revision
M20277 0
for technical reasons
Ytbehandling
E
Generell tolerans
ISO 2768-1
Installationsbild tunnvägg
Box 728, SE-194 27 Upplands Väsby, Sweden
Phone +46 8 59411050, Fax +46 8 59086880
Sealing ring
Liner & packningar
Sugmunstycke
70-75
4,25
13
UP
Ritad av Datum Godkänd av Datum
PD 2020-10-23
Artikelnummer
Skala Storlek
1 : 2 A2
Ritningsnummer Revision
M20277 0
Flange
UP