TESTBOY TV 296 Bedienungsanleitung Seite 38

Operation
Tap to save the password and establish a Wi-Fi connection. A Wi-Fi icon is displayed
on the main screen when the connection is established.
Set device hotspot
Thanks to the device hotspot, other devices that support WLAN can be connected to the
device for data transfer.
Go to Settings → Connections → Hotspot.
Tap to activate the hotspot function. The hotspot name consists of the last 9 digits of
the serial number of the unit.
Tap Set Hotspot. 4. A software keyboard is displayed.
Set the password for the hotspot.
DO NOT tap the space bar, otherwise the password may not be correct. The
password must contain at least 8 characters and consist of numbers and
letters. Tap
Tap to save.
Auto Power-Off
The unit has an auto power-off function to save energy. The setting can be adjusted in 10
min. steps from 0-60 min.
Set date and time
Go to Settings → Device Settings → Time and Date.
Set the date and time.
Press to save and exit.
Restore Device
Go to Local Settings → Device Settings → Device Restore to reset the device and
restore the default settings.
Format memory card
When a memory card is used for the first time in the portable thermal imaging camera, it
must first be initialised.
Select and go to Device Settings → Device Initialisation → Format Memory Card
to initialise the memory card.
38
to enter the password in the password field.
®
Testboy TV 296