TESTBOY TV 296 Bedienungsanleitung Seite 28

Operation
To obtain the best possible performance from the battery, the unit should not be connected
to a charger for more than 24 hours. The longest battery life can be ensured if the unit is
charged for 2 hours at least every 3 months. The battery should not be charged in
extremely cold environments.
Capture image
Before you start
Activate the torch via the swipe-down menu in dark surroundings.
●The unit does not support photo or video recording when the menu is
displayed.
●The unit does not support photo or video recording when connected to your
PC.
●In Settings → Capture Settings → File Name, you can set the file name for
photo or video capture to distinguish the files captured in a particular scene.
●Go to Settings → Device Settings → Device Initialisation to initialise the
memory card if necessary.
Go to Settings → Capture Settings.
Set the capture mode. You can choose between three modes.
Take a picture
Press once to take a picture.
If you want to edit captured images immediately, activate Edit before saving.
Your device performs a self-calibration at regular intervals to optimise image
quality and measurement accuracy. During this process, the image is briefly
paused and you will hear a "click sound" when a shutter moves in front of the
detector. Self-calibration occurs more frequently during start-up or in very
cold or hot environments. This is a normal process to ensure optimal
performance of your device.
Continuous recording
Set the number of images to be taken continuously after selecting this mode. In live view,
press , and the unit will continuously record the set number of images.
Planned recording
Set the interval for scheduled recording after selecting this mode. In live view, press
and the unit will capture images according to the set interval. Press
28
,
again to stop
®
Testboy TV 296