TESTBOY TV 296 Bedienungsanleitung Seite 34

Operation
Adjusting the image measurement
You can set gauges to measure the minimum, maximum and average temperature of the current
scene.
Tap Menu and select
Tap to select the desired thermography rule. Hot, Cold and Centre can be selected.
Tap Back to save and exit the function.
The minimum, maximum and average temperatures are displayed at the top
left of the screen. Tap the rule again to delete it.
Set temperature alarm
When the temperature of the target triggers the set alarm rule, the unit performs the configured
actions, such as emitting an acoustic warning signal and a flashing alarm.
Go to Settings → Measurement Settings → Alarm Settings.
Activate the temperature alarm and set the alarm parameters.
Alarm threshold
When the measured temperature exceeds the threshold, the unit sends an alarm message to the
client software. If audible warning is activated, the unit emits a sound and the flash flashes if the
light flash alarm has been activated.
Audible warning: The unit beeps when the temperature of the target exceeds the alarm
threshold.
Flashing light alarm: The flashing light flashes when the target temperature exceeds the alarm
threshold.
34
.
®
Testboy TV 296