Werbung
Verfügbare Sprachen
Verfügbare Sprachen
All manuals and user guides at all-guides.com
Where to install your device?
-
This equipment was designed to be installed in a residence. Please ask
your distributor before using it for any other purpose.
-
The device should be installed according to normal trade practice and
incompliance with legislation in the relevant country (NFC 15-100 for
France).
-
The equipment is class 2 and is protected against splashed water IP 24.
The device can be installed in volume 2 of a bathroom It's forbidden
to install the device in the volume 1. The device is to be installed so
that switches and other controls cannot be touched by a person in
the bath or shower.
Do not install the device :
-
In a draught that might affect adjustment (for example, under a central
mechanical ventilation unit etc...).
-
Under a fixed power socket or near curtains or other combustible
materials.
-
In a conform position, the air outlet grid and the control unit is visible
in the upper part of the device. It is forbidden to install a vertical unit
horizontally and vice versa.
INSTALLATION
50
Comply with the minimum clearance distances for
25
50
positioning of the device.
25
Do not install a shelf above vertical devices.
12
Volume 1 No electrical device
Class II IPX4 electrical device
Volume 2
(Norme EN 60335-2-43 : 2003/A2 :
2008)
19
EN
Werbung
