clage Zip HydroTap G4 BCS 160 Gebrauchsanleitung Seite 27

Blue Chilled Water LED
On all the time
This indicates that the chilled water
is ready.
Flashing slowly
This indicates that the temperature
of chilled water is not within the set
range.
When the chilled water is at the set
temperature, the light will stop flash-
ing. This could take several minutes.
During heavy usage, the temperature
can rise out of this range.
White Filter LED (Classic only)
White filter LED off
This indicates the filter is operating
within its normal specified lifespan.
White filter LED flashing slowly
The light will flash slowly when the
filter is due for replacement and the
LCD will show "Filter Change". Refer
to chapter "Replacing the filter".
Note: For the taps Arc and Celsius
Arc the need for a filter replacement
is indicated by cyclically flashing all
the LEDs in all three colours.
Tap LED'S
27
Blue LED's
White filter LED