Controls; Before Initial Operation; Charging Of Rechargeable Battery - Seto WORKLITE-MINI Gebrauchsanleitung

G
INFORMATION!
For luminaires with integrated rechargeable battery
The rechargeable battery is partially charged when delivered. Before use, the rechargeable battery must be charged
using a suitable charger so that you have the full lighting duration.
Only charge the rechargeable battery of the luminaire using the charging cable included in the scope of delivery.
Connect the charging cable to the USB-C charging port (A) on the top of the light, and connect the USB cable to a
suitable 230 V power supply.
Note: It is possible to operate the light during charging.
Status display
The charging level indicator is located on the upper rear side of of the luminaire.
The current charging status of the luminaire is displayed for 5 seconds when it is switched on.
When fully charged, all four LEDs light up blue constantly (see also "Capacity indicator", page 5).
10

Controls

A
B
C
D
F

Before initial operation

Charging of rechargeable battery

(A) USB output and type-C charging port
(B) Capacity indicator
(C) Button for brightness adjustment
(D) On / off button (press and hold to switch
on or off)
(E) Tripod receiver (6 mm)
(F) Foot with magnet
(G) Button for light adjustment
E