Getac K120 Serie Bedienungsanleitung Seite 4

Getting Started
Unpacking
K120 Tablet
Keyboard dock (optional)
Battery pack x 2
Standard
- or -
High capacity
Document(s)
Driver disc (optional)
Installing the Battery Packs
K120 has two battery compartments for two
battery packs; each is installed in the same way.
1.
With the battery pack correctly oriented,
attach its connector side to the battery
compartment at an angle (
down the other side (
latch should automatically engage.
2.
Slide the lock of the battery release latch
downward to the locked position.
2
AC adapter
AC power cord
Stylus
Tether
Screen cleaning cloth

) and then press

). The battery release
Battery release latch
CAUTION: Make sure the latch is correctly
locked, not revealing the underneath red part.
Installing the Micro-SIM Card
(Optional)
1. Locate the micro-SIM card slot. Slide the
protective cover to the unlocked position
and open the cover.
2.
Remove one screw to detach the small metal
plate that covers the micro-SIM card slot.
3.
Noting the orientation, insert the micro-SIM
card all the way into the slot.
Connecting to AC Power and
Starting Up
You must use AC power when starting up the
computer for the very first time.
1.
Tablet Only:
Open the cover of the power connector. The
cover is protected by a security lock. Slide the
lock outward to unlock the cover.
Connect the AC adapter as shown below.
Tablet + Keyboad Dock (optional):
Open the cover of the power connector.
Connect the AC adapter as shown below.