Bergstrom COMPACT 1.4 Montageanleitung Seite 37

COMPACT
Place the Compact Pro unit in upright
2a
position, loosening the alignment screws
only to allow them to move. Move the aligners
to the back of the unit, until the screws come
up against the aligner slides, and retighten
the screws.
CABIN EXTERIOR:
3
Position the Compact Pro in the hatch gap
and fit the aligners.
3
DAF XF SUPER SPACE CAB
EURO 5 AND EURO 6
FRONT PART
OF THE UNIT
2a
ALL MODELS
!
37
2a
Caution! When positioning the
unit above the hatch gap, check
that the wastewater run-offs are
not blocked by the EPDM seal.
EN
3
Sun hatch