Reflexion LDDW27i+ Bedienungsanleitung Seite 52

want to connect the unit to the Internet at a later time or not at all, you can simply
press the key to skip the process.
7. Use the following buttons to make the menu settings.

Press the

Use the
LAN connection: Connect the LAN cable from your router to the RJ45 socket of the TV
set. The network settings are made automatically (connection status: connected, the
IP address is displayed here). Navigate to the menu item Next and press the
go to the next menu item.
Wi-Fi connection: Navigate to the WLAN icon to connect the unit wirelessly to the
Internet. The following settings can be made.

WI-FI: In this menu you can switch the WLAN function on/off.

IP: The IP address is displayed here if the unit is connected to a network.

Wi-Fi list: The Wi-Fi networks found are displayed here.
Set Wi-Fi
1) Select your wireless network from the Wi-Fi list and press the
2) The menu item Password is automatically selected.
3) Press the
4) Enter your WLAN password. Use the
letters/numbers/characters. Press the
have entered the password, navigate to the ► symbol at the bottom right of the
keyboard and press the
key.
5) After you have successfully entered the password, the unit is connected to the
network.
6) Now press the
menu item.
8. Country: In this menu item you select the installation location of the unit. "Germany"
is preset as the default country. Press the
country. Press the
to select the desired country. Press the
key again to move to the next menu item.
9. Select the "Finish" menu item and press the
10. You will now be taken to the Smart TV Home screen.
11. An overlay (tv-launcher-ru-toptech) appears. Confirm by navigating to "Allow" and
pressing the
key to enter the selection.
keys to navigate in the menu.
key to open the keyboard for password entry.
key. Then navigate to the
key to confirm the network settings and to move to the next
key to adjust the country. Then use the
key.
keys to select the
key to confirm the entry. Once you
key to continue with Germany as the
key to confirm the selection. Press the
key to complete the first installation.
52
key to
button.
symbol and press the
keys
UK