Garmin Edge Explore 2 Schnellstartanleitung Seite 9

DRAFT
Device Information
Charging the Device
NOTICE
To prevent corrosion, thoroughly dry
the USB port, the weather cap, and
the surrounding area before charging or
connecting to a computer.
The device is powered by a built-in
lithium-ion battery that you can charge
using a standard wall outlet or a USB port
on your computer.
NOTE: The device will not charge when
outside the approved temperature range
(page 9).
1 Pull up the weather cap
USB port .
Quick Start Manual
2 Plug the small end of the USB cable
into the USB port on the device.
3 Plug the large end of the USB cable
into an AC adapter or a computer USB
port.
from the
4 Plug the AC adapter into a standard
wall outlet.
When you connect the device to a
power source, the device turns on.
5 Charge the device completely.
After you charge the device, close the
weather cap.
Specifications
Operating temperature range: From -20º
to 60ºC (from -4º to 140ºF)
Charging temperature range: From 0º to
45ºC (from 32º to 113ºF)
9