Garmin Edge Explore 2 Schnellstartanleitung Seite 13

DRAFT
Going for a Ride
If you are using a wireless sensor or
accessory, it can be paired and activated
during initial setup.
1 Hold to turn on the device.
2 Go outside, and wait while the device
locates satellites.
The satellite bars turn green when the
device is ready.
3 From the home screen, select
to view the biking profiles.
4 Select a biking profile.
5 Press to start the activity timer.
Manuel de démarrage rapide
NOTE: History is recorded only while
the activity timer is running.
6 Swipe left or right to view additional
data screens.
You can swipe down from the top of
the data screens to view the widgets.
7 If necessary, tap the screen to view
status overlay data (including battery
or
life) or return to the home screen.
8 Press to stop the activity timer.
TIP: Before you save this ride and
share it on your Garmin Connect
account, you can change the ride
type. Accurate ride type data is
important for creating bike friendly
courses.
13