Garmin Edge Explore 2 Schnellstartanleitung Seite 3

DRAFT
Swipe down to view the
widgets, then swipe left or
Widgets
right to view more widgets.
Charge using an external
power accessory.
Electrical
NOTE: Not available on all
contacts
models.
NOTE: Go to www.buy.garmin.com to
purchase optional accessories.
Pairing Your Smartphone
To use the connected features of the
Edge device, it must be paired directly
®
through the Garmin Connect
of from the Bluetooth settings on your
®
smartphone.
1 From the app store on your
smartphone, install and open the
Garmin Connect app.
2 Hold to turn on the device.
The first time you turn on the device,
you will select the device language.
The next screen prompts you to pair
with your smartphone.
3 Follow the instructions in the app
to complete the pairing and setup
process.
Quick Start Manual
After you pair successfully, a message
appears, and your device syncs
automatically with your smartphone.
Installing the Standard Mount
For the best GPS reception, position the
bike mount so the front of the device
is oriented toward the sky. You can
install the bike mount on the stem or the
handlebar.
NOTE: If you do not have this mount, you
can skip this task.
1 Select a secure location to mount the
device where it does not interfere with
the safe operation of your bike.
app, instead
™
2 Place the rubber disk
of the bike mount.
Two rubber disks are included, and
you can select the disk that best fits
your bike. The rubber tabs align with
the back of the bike mount so it stays
in place.
on the back
3