Werbung
-
©
DISASSEMBL
Caution on-Disassembly.
;
ete
Follow the below-mentioned notes when disassembling the:
unit and reassembling
it, to keep its safety and excellent
performance:
_
1. Take out a record of the unit.
2. Be sure
to remove
the input/output
plug from the
SM-307H
before starting to disassemble the unit.
3. Take off nylon bands or wire holders where they need
be removed when disassembling the unit. After servicing
the unit, be sure to rearrange the leads where they were
before disassembling.
-
STEP
REMOVAL
PROCEDURE
;
hay Dust cover
1. Lift it up to remove
1. Turntable sheet
|
Top cabinet
|
2.Screw...,.....,
2. Turntable Drive belt. . (A)x1
Note
*1, Tonearm Forwarding
The tonearm can be moved in the following two ways;
2. To move the tonearm manually;
Holding the plunger PWB, move the tonearm to the
desired position. See Fig. 4-1.
Never attempt to grasp the tonearm when moving it, or
it may be damaged.
Turntable
© Caution on Assembling the Cabinet
Prior to assembling the cabinet, be sure to turn on the
power switch.
Where to position
the tonearm
Plunger PWB
Figure 4—1
Figure 4—2
<>
Tonearm Cover
"ee
Top Cabinet
Figure 4—3
63 x 20 mm
Figure 4—4
Werbung
