Routine Maintenance; Product Maintenance; Cleaning The Body - Roborock Dyad Pro Benutzerhandbuch

Routine Maintenance

To maintain optimal performance of the product, refer to the
following table for routine maintenance.
Maintenance
Parts
Frequency
Roller 2–4 weeks
Filter 1 month
Cleaning head and
1 month
dirty water pipe
Dirty tank 1 month
Dirty water level
1 month
sensor
Charging dock tray As needed
Charging contact 1 month

Product Maintenance

If this product is left unused for a prolonged period of time,
fully charge it and unplug it before storing it in a cool and dry
Replacement
place. Do not place the product in humid locations or under
Frequency
direct sunlight. Charge it at least once every 3 months to avoid
6–12 months overdischarge.

Cleaning the Body

6–12 months
Wipe and clean the body with a soft and dry cloth. Before cleaning,
N/A
unplug the power supply and keep the vacuum cleaner off.
Cleaning the Dirty Tank and Filter
N/A
1. Take out the dirty tank, pull out the cover, and open the water
N/A
N/A
N/A
015
level sensors. Clean the parts with the provided maintenance
brush, rinse them with cold water, and then snap the water
level sensors back in place.
Water Level Sensors