Roborock Dyad Pro Benutzerhandbuch Seite 19

Routine Maintenance
Cleaning the Cleaning Head and Dirty
Water Pipe
1. Remove the dirty tank and front and rear rollers. Switch off the
vacuum cleaner and stabilize the body.
2. Clean the roller slots and dirty water pipe with the maintenance
brush provided.
3. Wipe the charging contacts with a dry cloth.
4. Reinstall the rollers and dirty tank in place.
Note: Do not wash the cleaning head directly with water.
Charging Contacts
Cleaning the Charging Dock Tray
1. Grasp the side handles of the tray and pull upward.
2. Rinse the tray with water and reinstall it in place after drying.
Note: Only remove and wash the tray. Do not wash any other parts of the charging dock.
018