SOLIS 1661 Bedienungsanleitung Seite 68

appliance to cool for 20 minutes after the fourth grinding
process before you place it back in operation (see section
"Overheating protection" on page 76 of this manual).
34. The conical burrs are sharp, it needs to take care when hand-
ling the sharp cutting blades, emptying the bean container
and during cleaning.
35. Do not place or position any objects on the appliance.
GB
36. Always unplug from the mains before you remove the lid
from the bean container or remove the entire bean container
from the appliance.
37. Always switch the appliance off with the Start/Stop button
and disconnect the power plug when not using the appliance
or left unattended. Then let the appliance cool down com-
pletely before assembling, disassembling, cleaning, changing
accessories, approaching parts that move in use or moving
the appliance.
38. Pull the plug after every use. Only then, the appliance is fully
switched off.
39. Keep the appliance clean. Always switch the appliance off
and pull the plug from the power socket before cleaning and
storing the appliance. Please refer to the notes given in the
section "Cleaning and care" on page 76 of this manual.
40. Always fully unwind the power cord before connecting the
power plug to the power socket.
41. It is not necessary to use oils or lubricants on this appliance.
42. Repairs to this appliance, including mains cable replacement,
may only be carried out by authorised service agents. Improp-
er repair work can be a source of danger to appliance users.
68