Akai Reference Master GX-75 Bedienungsanleitung Seite 16

Convenient playback features
IPSS: Instant Program Searching
System
IPSS canbe used to directly locate and start playback from any
recorded segment on the tape, within 16 segments of your
starting point, in either the forward or reverse direction.
1 Press the IPSS. button. The IPSS indicator will light up.
Press the PR or <¢q button repeatedly until the number of
the program you wish to start playback from is displayed
on the digital display.
When pressing the > or << button, the digital counter
display will be replaced by the program display. When lo-
cating a program in the forward direction, 01, 02 etc., will
be displayed on the program display and when locating a
program in the reverse direction, -01, -02 etc., will be dis-
played.
The [> indicator will flash on and off while the tape is wind-
ing and the displayed number will decrease by 1 each time
a blank space between selections (unrecorded section) is
passed. When the chosen selection is found, the cassette
deck will begin playback and the program display will be
replaced by the digital tape counter.
3 To cancel IPSS
Press the IPSS button again. The IPSS indicator will go off.
If IPSS is canceled while the tape is being wound, the cas-
sette deck will continue winding the tape until the end.
If the selection is not found during IPSS
operation
The cassette deck will continue searching to the end of tape is
reached and stop automatically.
The Program display will be replaced by the digital counter dis-
play.
+ eDit -—_-——
MEMORY A--B REC CANCEL
Y] dies
REC PAUSE EJECT. CLOSE AUTO MUTE
Notes for IPSS function
@ IPSS detects low volume levels (blank spaces between se-
lections) in order to determine when each selection begins
and ends. When the music signals are below a specific
volume level for a length of time which is more than approxi-
mately 4 seconds, that interval is detected.as a blank space
between selections.
@ During classical music selections and music selections
which have been recorded "Live", some parts may contain
low signals for an interval of more than 4 seconds, and IPSS
may detect this space as an interval between selections. |
@ During some "Live" recordings, there may be applause be-
tween the selections. Such intervals (which have a volume
which is too high) will not be detected as blank spaces and
will be skipped by the IPSS system.
@ Pressing the >> or <q button at the very beginning or end
of a selection may cause malfunction of the IPSS function.
@ IPSS is automatically defeated when the power is turned off.