Tape Playback; To Stop Playback - Akai Reference Master GX-75 Bedienungsanleitung

Tape playback
Before beginning
Set the TIMER START switch to OFF.
Set the CAL and CD/DAT DIRECT switches to m .
Set the MPX FILTER switch to = .
Turn on the power of all the components.
After the power is turned on, the operation buttons cannotbe
used for a few seconds while the cassette deck stabilizes it-
self. © '
@ Set the amplifier's input selector to the TAPE position.
@ Check the cassette tape being used for recording. Make
sure the recording defeat tabs are intact and that the tape's
recording time is of sufficient length.
SEPARATED BLOCKS HIGH RIGID CONSTRUCTION
STEREO CASSETTE OCOX GX-75
Press the M/2 button to open the cassette holder and
load the cassette tape.
Insert tape exposed side down.
2? Set the DOLBY NR ON/OFF and C-TYPE/B-TYPE select
switches according to how the tape was recorded:
Tapes recorded with DOLBY C-type NR... ee eeeeseees
Set the DOLBY NR ON/OFF switch to = and the
C-TYPE/B-TYPE select switch to = .
Tapes recorded with DOLBY B-type NR... eee
Set the DOLBY NR ON/OFF switch to .= and the
C-TYPE/B-TYPE select switch to m .
Tapes recorded without Dolby NR..........eeeeeeeereeeereeees
Set the ON/OFF switch to m . :
3 To start playback
'Press the ® button.
The [> and TAPE indicators will appear on the FL display
and playback will begin.
The cassette deck will stop automatically when the end of
the tape is reached.
To stop playback
Press the Mi/# button.
The deck mode indicator will go off.
To wind the tape quickly
To wind the tape to the end
Press the > button. La
The >> indicator will light up while the tape is winding.
To rewind the tape to the beginning
Press the <q button. :
The <q indicator will light up while the tape is rewinding.
Press the > button to start playback from the fast forward or re-
wind modes or press the Hi/#_ button to stop the tape.
Note
@ During playback, the DOLBY HX PRO system will be defeat-
ed automatically if the DOLBY HX PRO switchissetto om .