Technical Data - Instar In-9406 2K+ Bedienungsanleitung

12. Technical Data

Image Sensor
Sensor
Lens
Angle of View
Video Properties
Video Encoding
Video Framerate
Supported Resolutions
Flip / Mirror Image
Video Settings
Communication
Network Interface
Wireless (not for PoE version)
WiFi Frequency Range
WiFi Transmission Power
WPA Encryption
PoE (only for PoE version)
Hardware
PIR Detector
Infrared LEDs
MicroSD Card Reader
Power Supply
Power Consumption
Operating Temperature
Requirements
Web Browser
CPU / Graphic Card
Go to https://install.instar.com
1/3" WQHD Sony STARVIS IMX335 CMOS Sensor
f = 4.3mm; F/1.6 (IR Lense) / M12 - S-Mount
~90° diagonal
h.265 / h.264 high, main and baseline / MJPEG
Up to 25fps
2560x1440, 1920x1080 und 680x360 Pixel
Horizontal / Vertical
Brightness / Contrast / Saturation / Exposure...
10Base-T/100Base-TX Ethernet Port
5GHz / 2.4GHz, Wi-Fi 5 (802.11ac)
2412-2472 for EU, 2412-2462 for FCC,
5150 - 5250 / 5725 - 5850MHz, 5725-5875 for EU
2.4G WLAN for EU: <17dbm @11b, <15dbm@11g/n
5G RLAN for EU: <16dBm @11a, <14dBm @11n, <12dBm
@11ac (for 5150-5250MHz)
<13dBm @11a, <12dBm @11n/ac (for 5725-5875MHz)
WPA/WPA2-PSK (AES, CCMP)
IEEE 802.3af (+ Pin 4 and 5 / - Pin 7 and 8)
Panasonic Passive Infrared Motion Detector
5 High-Power LEDs / 15-20m effective range
For MicroSD / SDXC cards up to 128 GB
Input: 12V DC 2A
Max. 9W (Normal operation 3.1W w/o IR LEDs)
- 10°C to 55°C (-25°C with optional heater)
Web browser supporting HTML5
Dual Core (min. 2Ghz) / 256MB+ Graphic Card
16-EN