Werbung
Verfügbare Sprachen
Verfügbare Sprachen
A rinse-aid is necessary so that
no water-spots remain on dishware
after washing.
Use only rinse-aid intended for
household dishwashers.
Turn lid of the rinse-aid reservoir -
(Fig. @/24) to open.
Pour in rinse aid until the level indicator
(Figure @/25) has turned from clear to
completely dark. The clear/dark surface
indicates the level of rinse-aid in the dispenser.
Remember to screw lid tightly
on afterwards.
With each washing, the correct amount
of rinse-aid will be dispensed.
Low rinse-aid indicator
Fig. @/25
When the low rinse-aid indicator appears
bright, the rinse-aid must be replenished.
If it is dark, there is enough rinse-aid
on hand.
20
Dispenser regulator
Fig. @/26
The dispenser regulator may be set |
between 1 and 6. Upon delivery,
it will be set on 3.
The setting should only be changed
if deposits or water spots remain -
on the dishware.
. -
— If lime streaks appear,
turn the regulator back.
- If water spots appear,
set the regulator on a higher number.
Werbung
