Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Optional Equipment
b) Using the Menu »Video Connection«
1 Press MENU ®.
2 Push joystick @ to blue or green to select the symbol £3 on the menu screen.
Push to yellow to confirm.
3 Push to blue or green to select »TV screen« (input source for TV-screen),
or »Output« (output source for > 2/-<3 2H).
Push to yellow to confirm.
You can select between the following sources:
¢ TV. TV-tuner * YC:S video signal * AV: Audio/Video
TV screen:
TV, AV1, RGB, AV2, YC2, AV3, YC3
Output:
TV, AVI, AV2, YC2, AV3, YC3
4 Push to blue or green to select the desired source. Press joystick @ to store.
5 Press MENU © to restore the normal TV picture.
Using the buttons @ on the Remote Commander you can control other Sony
equipment.
1 Set the selector VIR 1 2 3 MDP according to the equipment you want to control.
VTR1:
Beta VCR
VTR2:
8mm VCR
VTR3:
VHS VCR
MDP:
Video Disk Player
2 Use the buttons @ on the Remote Commander to operate the equipment.
Tips
* If your video equipment has a COMMAND MODE selector, set this selector to the
same position as the VIR 1 2 3 MDP selector on the TV Remote Commander.
« If the equipment does not have a certain function, the corresponding button on the
Remote Commander does not work.
3 TV Screen
ftv
ARO]
5 Output
ARD]
Advanced Operation
41
Werbung
