Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Advanced Presetting
Using the menu »Further Programme Preset« you can
a) individually adjust and store the volume level of each channel (Volume offset).
b) in case of picture distortions use manual fine tuning to obtain a better picture
quality. The factory setting is »on« for AFT (Automatic Fine Tuning).
1 Press MENU ®.
2 Push joystick @ to blue or green to select the symbol £4 on the menu screen.
Push to yellow to confirm.
3 Push to blue or green to select »Installation«. Push to yellow to confirm.
4 Push to blue or green to select »Further Programme Preset«. Push to yellow to
confirm.
5 Push to blue or green to select the programme position you want. Push to yellow
repeatedly to select:
a) VOL (Volume Offset) or b) AFT (Automatic Fine Tuning). The selected item
changes colour.
6a) VOL
Push to blue or green to adjust the volume for the selected programme position
within a range of -7 to +7. Press the joystick @ to confirm. Repeat step 6 to set the
volume level for other programme positions.
b) AFT
Push to blue or green to fine-tune the channel within a range of -15 to +15. Press the
joystick @ to confirm. Repeat step 6 to fine-tune other channels.
7 Press MENU @ to restore the normal TV picture.
Using this function you can preset the desired input source (e.g. 45) 1, RGB signal) to
the respective AV input (AV1). In this way a connected VCR switches automatically
to the RGB signal. Also you can label the input sources.
Press MENU ®.
Push joystick @ to blue or green to select the symbol =Jon the menu screen.
Push to yellow to confirm.
3
Push to blue or green to select »Installation«. Push to yellow. Push to blue or
green to select »AV Preset«. Push to yellow to confirm.
Push to blue or green to select the desired AV input. Push to yellow to confirm.
Push to blue or green to select the desired source. Push to yellow to confirm. For
the respective AV inputs you have the following choice:
AV1: RGB or AV
AV2: YC2 or AV
AV3: YC3 or AV
6
To label a source: Push to blue or green to select the first character (letter or
number, »-« for a blank). Push to yellow to confirm. Select the other four
characters in the same way.
7
For automatic format and PAL plus selection (Auto 16:9):
Push to blue or green to select »On« for the AV input.
Press the joystick @ to store.
Repeat steps 4 to 8 for the other AV inputs.
10 For RGB input source only: Push to blue or green to select RGB H Centre.
¢ Push to yellow to confirm.
¢ Push to blue or green to adjust the centre of the picture in a range of —5 to +5.
Press the joystick @ to store.
« Repeat step 10 to adjust RGB H Size.
11 Press MENU @ to restore the normal TV picture.
32
Advanced Operation
Joystick
Further Prog. Preset
AV Preset
Picture Rotation
Language/Country
Demo
[FURTHER PROGRAMME PRESET
PROG
VOL
AFT
oovooous ecoceosee
AV: PRESET#a::
AV-INPUT
SOURCE
AUTO 16:9
RGB H Centre
RGB H Size
_
Werbung
