Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Optional Equipment
Connecting Optional Equipment
You can connect a wide range of optional equipment to your TV. Refer to the
illustrations on the back lap page of this Instruction Manual.
Symbol
Acceptable input signals
Available output signals
a4
Normal audio/video and RGB
Audio/video from TV tuner
& 2/-<9 2
Normal audio/video and S video
Audio/video from selected source
23, -©3
Normal audio/video and S$ video
No output
CG
No inputs
Audio from selected source
About S video input
Video signals may be separated into Y (luminance) and C (chrominance) signals.
Separating the two signals prevents interference and thus improves the picture
quality.
Tips:
¢ If the picture or sound is distorted, move the VCR away from the TV.
¢ When connecting a monaural VCR, connect only the white jack to both the TV and
VCR.
3 Selecting Input and Output Signals
a) Direct Access Buttons
Selecting the Input
Press 2) @ [ repeatedly to select one of the following input modes:
Symbol on the screen
Input signals
o1
Audio/video through Euro AV connector
ca)
RGB through Euro AV connector
22
Audio/video through Euro AV connector
32
S video through Euro AV connector
23
Audio/video through the phono jacks
<33
S video through the 4 pin DIN
BI
Press
© @ to restore the normal TV picture.
Selecting the Output from Euro AV connector @>2/-€5 2
Press > ® repeatedly to select one of the following output sources for the connector
& 2/52 ff:
Symbol on the screen
@2/-€9 2 [J connector output signal
1@
Audio/video from Euro AV connector
2
Audio/video from Euro AV connector
2
Audio/video from Euro AV connector
3
Audio/video from the phono jacks
3 >
Audio/video from the 4 pin DIN
BI
TV
Audio/ video from the aerial terminal 1T
K}
40
Advanced Operation
Werbung
