Barbecook LOEWY 40 Benutzerhandbuch Seite 15

• The Barbecook quality department will confirm that the
parts are defective and that they proved defective under
normal use, correct assembly and proper maintenance.
If one of these conditions is not fulfilled, you are not covered
by the warranty. In all cases, the warranty is limited to the
repair or replacement of defective parts.
9.2. Not covered
The following damage and defects are not
covered by the warranty:
• Normal wear and tear (rust, deformation, discoloration etc.)
of parts that are directly exposed to fire or intense heat.
These parts will need to be replaced from time to time.
• Visual irregularities that are inherent to the manufacturing
process. These irregularities are not regarded as
manufacturing defects.
• All damage caused by inadequate maintenance, improper
storage, incorrect assembly or modifications made to the
pre-assembled parts.
• All damage caused by the misuse of the appliance (not
using it according to the instructions in this manual, using it
for commercial purposes, using it as a fire basket etc.).
• All consequential damage caused by careless or non-
compliant use of the appliance.
• Rust or discoloration as a result of external factors, use of
aggressive cleaning products, exposure
to chlorine etc. This damage is not regarded as a
manufacturing defect.
www.barbecook.com 15