7.
Rotate the tubing collar so that its shape aligns with the
opening in the support arm. Slide the tubing collar into
the support arm (see Figure 4a) and close the latch (see
Figure 4b).
Figure 4. Attach chamber tubing collar to the instrument tubing support arm.
8.
Press the tubing down into the groove on the support
arm and through the notch in the centrifuge ridge (see
Figure 5).
Caution: Make certain all tubing is free of any kinks,
twists, or flat areas.
Figure 5. Place the tubing into the groove and through the notch.
12
English