Herunterladen Diese Seite drucken

walser Instarter Spectar Bi-Color Spot LED Panel 4.0 Gebrauchsanleitung Seite 37

Werbung

Verfügbare Sprachen

Verfügbare Sprachen

3.
Turn the function knob (7) to the right or left until the desired effect
(01-04) is reached.
→ The lamp has the effects Thunder, Lightning, Screen, Candlelight.
4.
To end the effect, briefly press the function knob (7) again.
8.
Transporting or storing the lamp
1.
Switch off the lamp. To do this, move the on/off switch (8) to the
position [0].
2.
Pull the mains plug out of the socket and the appliance plug out of
the power supply unit.
3.
Pull the plug of the power supply unit out of the socket (5) at the
back of the lamp.
4.
Slide the batteries upwards out of the battery holders and place
them safely.
5.
Let the lamp cool down completely.
6.
Clean the lamp, if necessary (see chapter 9).
7.
Open the fixing screw of the bracket (4) and lift the lamp from the stand.
8.
Store the lamp and accessories in the transport bag and, if necessary,
in the item packaging.
NOTE - Always store the lamp in a dry and dust-free place.
EN
37

Werbung

loading

Diese Anleitung auch für:

23143