JSP AFP-25 Bedienungsanleitung Seite 4

FIELD OF APPLICATION
• The AFP-25 Helmet Mounted Arc Flash Faceshield together with additional PPE appropriate for the afore determined level
of protection, protects the qualified user during live working or when in the vicinity of live parts.
• The AFP-25 Helmet Mounted Arc Flash Faceshield provides protection to eyes and face only if used as intended.
• Do not use the AFP-25 Helmet Mounted Arc Flash Faceshield for electric arc welding. Additionally, the faceshield should
not be used or stored in areas where arc welding work is carried out.
• A proper risk assessment must be carried out by a qualified person prior to the work being carried out.
FITTING THE VISOR TO THE HELMET
The AFP-25 Helmet Mounted Arc Flash Faceshield must only be mounted to a JSP EVO
that is approved for electrical protection at the maximum expected level. In case of any doubt, contact JSP Technical Helpline.
To fit the visor, insert the adaptors into the universal attachment slots on the helmet. Listen for a click sound to ensure the
adaptor is securely fitted.
POSITIONING THE VISOR ON THE HELMET
Fit and adjust the helmet, then grip the chinguard to pull the shield down into the deployed/working position.
Position 1:
AFP-25 Helmet Mounted Arc Flash Faceshield
in raised position.
®
AFP-25 Helmet Mounted Arc Flash Faceshield
in deployed/working position.
4
5 unvented industrial safety helmet
Position 2: