Styro Hansa Aura Gebrauchsanleitung Seite 8

Turning the light on/off
1. Insert the plug in a socket.
2. Arrange the light in the desired position.
3. Press the switch to turn on/off and control
the lamp.
Multi-funktion Switch:
- short press cycle:
On > 3 color temperatures > Off
- long press: dimming
Lighting source
• Lighting source service life: 30 000 hours
• The lighting source cannot be replaced.
• The construction of the luminaire does
not allow the lighting source to be
replaced, as there is a risk of damaging
the luminaire.
Care and cleaning
WARNING
Hazardous grid voltage!
Risk of electric shock!
Improper use could result in
electric shock.
– When cleaning the light, always pull the
mains plug out of the socket. When doing
so, always take hold of the plug and not
the cord.
– Make sure that no water penetrates the
inside of the light or other parts carrying
a current.
– Carefully wipe off the light with a damp
cloth or a dry dust cloth.
8
GB OPERATING INSTRUCTIONS
Technical data
Voltage:
Power:
Luminous flux:
Colour temperature:
Protection class:
Ingress protection:
Model number:
This product contains a light source of
energy efficiency class F.
Distribution
styro ag
Frauholzstrasse 27
CH-6422 Steinen
Tel. +41 (0)41 833 80 10
www.styro.ch
EU Distributor
styro GmbH
Industriestrasse 2
D-91583 Schillingsfürst
Tel. +49 9868 98949-0
www.styro.de
LED lamp Aura
100 – 240 V AC / 50 – 60 Hz
400 lm
2800 – 6000 K
41-5011.005-006
8 W
II
IP20