Sony XDCAM PDBK-202 Bedienungsanleitung Seite 15

Item Item name
number
926 2 ENC RATE
(Mbps)
3 RESOLUTION Selects the number of
4 PROGRAM
NUMBER
5 OUTPUT
MODE
6 PACKET
LENGTH
7 META
PACKET OUT
Settings
Sets the encoding rate.
25.00: Sets the encoding
rate.
---: When sub item TS i.LINK
MODE of menu item 926
is set to "HDV".
You can set this in units of
0.01 Mbps (or 0.20 Mbps
when the SHIFT button is
held down) over the range
from 15.00 Mbps to 43.25
Mbps.
horizontal pixels for the 1080i
format.
1440: 1440
When sub item TS i.LINK
MODE of menu item 926 is
set to "HDV", this is fixed as
"1440".
1920: 1920
The 1920 setting is enabled
when the encoding rate is
35.00 Mbps or higher.
Note
This item does not appear
when the video format is
720P.
Specifies a DVB-ASI input/
output signal program
number.
00100: Sets the program
number (1 to 65535
(FFFFh)).
---: When sub item TS i.LINK
MODE of menu item 926
is set to "HDV".
You can set this in units of 1
(or 200 when the SHIFT
button is held down).
Selects the transmission
mode.
Packt: Packet mode
Burst: Burst mode
Selects the packet length.
188 Byte: 188 bytes
204 Byte: 204 bytes
Specifies output of DVB-ASI
signal metadata packets.
off: Do not output metadata
packets.
on: Output metadata packets.
---: When sub item TS i.LINK
MODE of menu item 926
is set to "HDV".
Item Item name
number
926 8 PID(PMT)
9 PID(PCR)
10 PID(VIDEO)
11 PID(AUDIO)
Settings
Changes the PMT packet PID
value for DVB-ASI output.
0081h: Set PID value.
---: When sub item TS i.LINK
MODE of menu item 926
is set to "HDV".
You can set the value over the
range from 0030h to 1FFEh
in 1h units (or 20h units when
the SHIFT button is held
down).
Note
Do not set the same PID
value as other item.
Changes the PCR packet PID
value for DVB-ASI output.
0134h: Set PID value.
---: When sub item TS i.LINK
MODE of menu item 926
is set to "HDV".
You can set the value over the
range from 0030h to 1FFEh
in 1h units (or 20h units,
when the SHIFT button is
held down).
Note
Do not set the same PID
value as other item.
Changes the VIDEO packet
PID value for DVB-ASI
output.
0810h: Set PID value.
---: When sub item TS i.LINK
MODE of menu item 926
is set to "HDV".
You can set the value over the
range from 0030h to 1FFEh
in 1h units (or 20h units,
when the SHIFT button is
held down).
Note
Do not set the same PID
value as other item.
Changes the AUDIO packet
PID value for DVB-ASI
output.
0814h: Set PID value.
---: When sub item TS i.LINK
MODE of menu item 926
is set to "HDV".
You can set the value over the
range from 0030h to 1FFEh
in 1h units (or 20h units,
when the SHIFT button is
held down).
Note
Do not set the same PID
value as other item.
Additional Setup Menu Items
15