Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Scope of Delivery
Multifunctional Environment Measuring Instrument 4 in 1 with detachable microphone
windbreaker
Illuminance sensor (attachable)
K-type temperature sensor (immersion probe)
Block battery 9V
Nylon carrying case
Operating manual
Inserting/Replacing the Battery
To ensure proper operation of the measuring instrument, the device has to be equip-
ped with an alkaline 9V block battery (type 6LR61 or MN1604 or 6F22 or 006P). If the
battery replacement symbol BAT appears on the display (bottom left), the battery
has to be replaced. Proceed as follows:
- Switch off the measuring instrument (press green key).
- Move the battery compartment cover on the back in direction of the arrow.
- Replace the battery by a new one of the same type. Please observe correct polarity
(+ and -).
- Put the battery compartment cover back onto the housing.
- Please make sure not to pinch the cables of the connecting clip (red and black)
when closing the housing.
Attention!
Leaky or damaged batteries might cause cauterization when in contact with the skin.
Therefore, use suitable protective gloves. Do not short-circuit batteries. Never try to
charge batteries. Do not throw them into fire because they might explode!
Do not leave used batteries in the battery compartment because even leakage-pro-
tected batteries might corrode and thus set free chemicals that might be bad for your
health or destroy the battery compartment.
Also remove the batteries from the battery compartment if not using the measuring
instrument for a longer period of time.
Environmental note!
The user is legally obliged (old battery regulation) to return all
used batteries (from round cells to lead storage batteries) to a
specialist dealer's shop where there are special facilities (collec-
ting boxes). It is forbidden to dispose of batteries in the garbage
bin or litter.
20
Werbung
Inhaltsverzeichnis
