EUROM Force 2201 Plus Bedienungsanleitung Seite 43

4. Squeeze the trigger
5. Switch the device on
Cleaning
WARNING
Be aware of the kickback when squeezing the trigger.
CAUTION
When you stop temporary:
• turn the device off;
• close the external water connection;
• remove the power plug.
1. Hold the jet gun
2. Aim the jet gun at the object that needs to be cleaned.
3. Squeeze the trigger
Cleaning with floor cleaner
1. Hold the jet gun
2. Place the floor cleaner
3. Squeeze the trigger
Change jet angle
CAUTION
The jet angle can only be changed of the adjustable nozzle. The turbo nozzle and
floor cleaner have a fixed jet angle.
1. If applicable, release the trigger
pos. 2).
2. Lock the safety lock under the trigger
ure 26, pos. 1).
3. Rotate the head of the nozzle
pos. 1) to change the jet angle:
◦ for a smaller (more powerful jet) turn it
clockwise (Figure
◦ for a bigger (less powerful jet) turn it an­
ti-clockwise (Figure
4. Unlock the safety lock under the trigger.
(Figure 26, pos. 2) for several seconds to remove the air from the hose.
(Figure 24, pos. 11).
(Figure 25, pos. 1) with both hands.
(Figure 26, pos. 2) and start cleaning.
(Figure 25, pos. 1) with both hands.
(Figure 25, pos. 5) on the surface the be cleaned.
(Figure 26, pos. 2) and start cleaning.
(Figure
(Figure
34, pos. 2).
34, pos. 3).
26,
(Fig­
34,
Figure 34.
43