Restore Factory Settings; Maintenance And Cleaning - HomeMatic HMIP-RFUSB Bedienungsanleitung

Restore factory settings

7 Restore factory settings
The factory settings of the device can be
restored. If you do this, you will lose all your
settings.
The factory settings of the RF USB stick can be restored
with a special command via the USB interface. In order
to transfer the command, the SDK and DDK include ap-
propriate software.
8

Maintenance and cleaning

The device does not require you to carry out
any maintenance. Enlist the help of an expert to
carry out any maintenance or repairs.
Clean the device using a soft, lint-free cloth that is clean
and dry. You may dampen the cloth a little with lukewarm
water in order to remove more stubborn marks. Do not
use any detergents containing solvents, as they could
corrode the plastic housing and label.
20