Jenoptik ProgRes Schnellstartanleitung Seite 6

5 Steps to capturing a perfect image 5 Steps to capturing a perfect image
5 Steps to capturing a perfect image
English
Image without white balance
Set Auto Exposure - Register tab "Exposure":
"Continuously" is activated per
default. To adjust exposure once,
click "Auto Exposure"
bar.
Set white balance:
Click "White balance"
which has a neutral grey tint and which is
Click "Reset white balance"
Background information for setting a suitable white balance:
Ideally, the highest RGB-value of the selected position is approximately 230.
The maximum RGB-value of 255 is not suitable for a white balance. The RGB-
values of the cursor position are displayed in the status bar in the lower right
corner of the image window.
6 6
in the icon
in the icon bar. Select a position in the image
Note: When resetting the white balance, the image will be reset to
default values and can have a green tint. In this case, carry out the
white balance again.
Image with white balance
not overexposed.
to reset the white balance.
ProgRes
®
Quick-Start-Guide 001