Jenoptik ProgRes Schnellstartanleitung Seite 11

Exposure: Set exposure settings
Exposure control: Insert the exposure
time in ms into the text box, or use
the slider bar to adjust the exposure
time.
Normalize exposure time for binning:
In Binning mode, the exposure time
for the captured image will be displa-
yed here.
Auto Exposure: Exposure will either be
continuously adjusted over the entire
image or it will be calculated based
on a selected region of interest (ROI).
By adjusting the intensity with the
slider the image is set generally
"brighter" or "darker".
Gain control: The image signal can
be amplified and exposure time can
be reduced to achieve a higher live
image frame rate.
Minimize gain during capture:
When capturing an image, gain will
be converted into exposure time, and
background noise in the captured
image will be minimized.
Overexposure: Overexposed image
regions will be highlighted in color.
ProgRes ® Quick-Start-Guide 001
Exposure Exposure
English
11 11