Bosch GCM 12 SD Professional Originalbetriebsanleitung Seite 39

OBJ_BUCH-1130-002.book Page 38 Thursday, July 1, 2010 11:44 AM
38 | English
Functional Description
Read all safety warnings and all in-
structions. Failure to follow the
warnings and instructions may re-
sult in electric shock, fire and/or se-
rious injury.
Intended Use
The power tool is intended as a stationary ma-
chine for making straight lengthways and cross-
ways cuts in wood. In this, horizontal mitre an-
gles from –52° to +60° as well as vertical bevel
angles from 47° (leftward) to 47° (rightward)
are possible.
The capacity of the power tool is designed for
sawing hardwood and softwood.
The power tool is not suitable for cutting alumin-
ium or other non-ferrous metals or alloys.
Product Features
The numbering of the components shown refers
to the representation of the power tool on the
graphic pages.
1 Dust bag
2 Allen key (size 1,5 mm)
3 Open-end spanner (17 mm; 10 mm)
4 Transport handle (front)
5 Clamp for handle
6 Tongue for grade-adjustment of handle
7 Handle
8 Button for releasing locking lever 43
9 Saw blade
10 Retracting blade guard
11 Roller
12 Insert plate
13 Locking bracket
14 Locking knob for various mitre angles
(horizontal)
15 Lever for mitre angle adjustment
(horizontal)
16 Clamping lever for various bevel angles
(vertical)
17 Detents for standard mitre angles
18 Saw table
1 609 929 X01 | (1/7/10)
19 Mounting holes
20 Fence
21 Fence extension
22 Locking screw for fence extension
23 Quick-action clamp
24 Angle indicator (vertical) for rightward bevel
angle range
0 – 45°
25 Slide device
26 Cable holder
27 On/Off switch
28 Transport safety-lock
29 Adjusting screw of depth stop
30 Transport handle (rear)
31 Locking screw for slide device
32 Scale for bevel angle (vertical)
33 Angle indicator (vertical) for leftward bevel
angle range
45°– 0
34 Adjustment knob for 33.9° bevel angle
35 Socket spanner (14 mm)/
Allen key (4 mm)/Phillips screwdriver
36 Lock screw of the length stop
37 Length stop
38 Saw-Table extension
39 Tensioning lever for saw-table extension
40 Scale for mitre angle (horizontal)
41 Knob for adjustment of the bevel angle
range
42 Spindle lock
43 Locking lever
44 Extraction adapter
45 Sawdust ejector
46/47
Phillips screw (attachment of retracting
blade guard)
48 Hexagon bolt for saw-blade attachment
49 Washer
50 Clamping flange
51 Interior clamping flange
52 Holes for quick-action clamp
53 Clamping lever of the quick-action clamp
54 Threaded rod
55 Screws for insert plate
56 Clamping screw of the length stop
Bosch Power Tools