Asus WL-320gP Schnellstarthilfe Seite 16

5.. Setting. up. your. wireless. interface.. To. set. up. your. wireless. interface,. follow. the. same.
instructions. from. 3. to. 5. as. above. Configurating. Wireless. Interface. in.Access. Point. mode.
on. page. 10.. You. can. change. to.AP. or. WDS(Bridge),. Station(Client),. or. URE(Repeater).
accordingly..Click.Save&Restart.to.restart.the.wireless.router.and.activate.the.new.settings.
8) Operation Mo��es
This.chapter.gives.information.on.the.operation.modes.of.the.ASUS.WL-320gP.Access.Point.
1) Bridge Mode (WDS)
Wireless.bridge,.also.known.as.Wireless.Distribution.System.or.WDS,.allows.you.to.connect.
to. one. or. many.Access. Points.. If. you. set. the. same. SSID. among. all. access. points,. wireless.
security.level.could.be.up.to.WPA-PSK..Otherwise,.security.level.is.WEP.only.
Access Point
AP. Mode. configures. the.ASUS. 802.11g.AP. for. a. specific. purpose.. By. default,. the.ASUS.
802.11g.AP.is.set.to.serve.as.an."Access.Point".where.a.wireless.mobile.client.can.connect.
wirelessly.to.a.wired.Ethernet.network.
WDS Only
With.WDS,.the.ASUS.802.11g.AP.can.only.communicate.with.other.Access.Points.
Hybrid
Hybrid.allows.you.to.use.the.ASUS.802.11g.AP.both.as.an.access.point.and.as.a.wireless.
bridge.
Channel
Both.Access.Points.in.Wireless.Bridge.mode.must.be.set.to.the.same.channel.
WL-320gP Access Point Quick Start Guide