Asus WL-320gP Schnellstarthilfe Seite 15

WL-320gP Access Point Quick Start Guide
5. Setting up your wireless interface. To set up your wireless interface, follow the same
instructions from 3 to 5 as above Configurating Wireless Interface in Access Point mode
on page 10. You can change to AP or WDS(Bridge), Station(Client), or URE(Repeater)
accordingly. Click Save&Restart to restart the wireless router and activate the new settings.
8) Operation Mo��es
This chapter gives information on the operation modes of the ASUS WL-320gP Access Point.
1) Bridge Mode (WDS)
Wireless bridge, also known as Wireless Distribution System or WDS, allows you to connect
to one or many Access Points. If you set the same SSID among all access points, wireless
security level could be up to WPA-PSK. Otherwise, security level is WEP only.
Access Point
AP Mode configures the ASUS 802.11g AP for a specific purpose. By default, the ASUS
802.11g AP is set to serve as an "Access Point" where a wireless mobile client can connect
wirelessly to a wired Ethernet network.
WDS Only
With WDS, the ASUS 802.11g AP can only communicate with other Access Points.
Hybrid
Hybrid allows you to use the ASUS 802.11g AP both as an access point and as a wireless
bridge.
Channel
Both Access Points in Wireless Bridge mode must be set to the same channel.

WL320gP_QSG-Final.indd 14 9/4/08 9:24:59 AM