Hitachi RAK-18PSC Bedienungsanleitung Seite 30

WEEKLY TIMER OPERATION
Step 2: Select Mode A or Mode B and activate or deactivate WEEKLY TIMER.
NOTE
When setting ONCE TIMER, operation of WEEKLY TIMER is interrupted. After ONCE TIMER operation
●
is complete, WEEKLY TIMER operation will be activated.
When ONCE TIMER is cancelled, operation of WEEKLY TIMER is also cancelled. Need to set WEEKLY
●
TIMER operation for activation.
After auto restart, WEEKLY TIMER operation is cancelled. Need to set WEEKLY TIMER operation for
●
activation.
■ How to select Mode A or Mode B of WEEKLY TIMER setting.
1
1. Press (WEEKLY) button.
2
Mode A will blink first).
2. Press (WEEKLY) button again.
3. Select Mode A or Mode B. Press
remote controller towards the indoor unit for about 3 seconds. Timer lamp
on the indoor unit will blink rapidly.
After beep sound emitted from indoor unit, TIMER lamp will light up.
3
Please ensure that the TIMER lamp lights up.
This indicates that Mode A or Mode B selection and active WEEKLY
TIMER have been confirmed.
■ Setting non-active WEEKLY TIMER .
1. Direct the remote controller towards the indoor unit and press
(CANCEL) button.
1
Beep sound will be emitted from indoor unit and TIMER lamp will be OFF.
Reservation indication on remote display will also disappear.
This indicates that non-active WEEKLY TIMER has been confirmed.
To activate back the setting of WEEKLY TIMER , repeat the steps for
●
"How to select Mode A or Mode B of WEEKLY TIMER setting".
and
(SEND) button while directing the
- 25 -
blink on the display. (Normally
and blink on the display.