Herunterladen Diese Seite drucken

Beurer HD 75 Gebrauchsanleitung Seite 13

Werbung

Verfügbare Sprachen
  • DE

Verfügbare Sprachen

  • DEUTSCH, seite 1
4.6 Automatic switch-off
This heated overblanket switches off automatically after 3 hours. Once the heated overblanket has switched
off, it is no longer heated and the indicator lamp flashes.
To switch on the heated overblanket again, first set the sliding switch for ON/OFF and temperature settings
to the OFF ( 0 ) position for 5 seconds. After about 5 seconds it is possible to switch it on again.
5. Cleaning and maintenance
WARNING
Before cleaning, always remove the mains plug from the socket first. Then disconnect the controller from
the heated overblanket by unplugging the plug-in coupling. Otherwise there is a risk of electric shock.
CAUTION
• The controller must never come into contact with water or other liquids, as this may cause damage.
To clean the controller, use a dry, lint-free cloth. Do not use any chemical or abrasive cleaning agents.
Small marks on the heated overblanket can be removed with a damp cloth or sponge and, if necessary, with
a little liquid detergent for delicate laundry.
CAUTION
• Please note that the heated overblanket may not be chemically cleaned, wrung out, tumble dried,
put through a mangle or ironed.
Set the washing machine to a particularly gentle wash cycle at 30°C (wool cycle).
Use a delicate laundry detergent and measure it out according to the manufacturer's instructions.
CAUTION
• Please note that frequent washing of the heated overblanket has a negative effect on the product.
The heated overblanket should therefore be washed in a washing machine a maximum of 5 times during its life.
Immediately after washing, reshape the heated overblanket to its original dimensions while it is still wet and
spread it out flat over a clothes horse to dry.
CAUTION
• Do not use pegs or similar items to attach the heated overblanket to the clothes horse. Failure to do
so may damage the heated overblanket.
• Do not reconnect the controller to the heated overblanket until the plug-in connector and electric
overblanket are completely dry. Failure to do so may damage the heated overblanket.
WARNING
• Never switch the heated overblanket on to dry it! Otherwise there is a risk of electric shock.
6. Storage
If you do not plan to use the heated overblanket for a long period of time, we recommend that you store it in
the original packaging. For this purpose, disconnect the controller from the heated overblanket by unplug-
ging the plug-in coupling.
13

Werbung

loading