Hama SIRIUM2000AMBT Kurzanleitung Seite 12

Note
• To switch the loudspeaker off completely, disconnect it
from the power supply.
Volume adjustment / mute
• Press [VOLUME -/+] to reduce / increase the volume.
• Press [ ] (2) on the remote control to mute the
loudspeaker.
• Press [ ] (2) again to reset the volume to the level
before it was muted.
5. Setting up the loudspeaker
Note
• To be able to use the product's full range of functions,
you must additionally download the Amazon Alexa
app and create an Amazon account. For this purpose,
follow the instructions in the Amazon Alexa app.
Further information can be found at www.amazon.
co.uk
5.1 Downloading the Hama Smart Audio app
Note
The following operating systems are supported:
• iOS 8 or higher
• Android 4.4.2 or higher
• Open the iTunes App Store or Google Play Store on your
smartphone.
• Use the search term "Hama Smart Audio".
• Download the app in the usual way and install it on your
smartphone. To do this, follow the instructions on your
smartphone.
5.2 First-time setup of the device with the Hama
Smart Audio app (ALEXA function)
Note – WLAN (wireless network)
• Ensure that the router is switched on, is functioning
correctly and that there is a connection to the internet.
• Activate the WLAN function of your router.
• Follow your router´s operating instructions as regards
the correct functioning of the WLAN connection.
• Ensure that the loudspeaker is in WLAN pairing mode.
The status LEDs (1-5) ash.
• Ensure that the Hama Smart Audio App is installed
on your smartphone and that all updates have been
installed.
• Open the Hama Smart Audio app and touch
[CONFIGURE].
• Then touch [Add More Speakers].
4
• Open your smartphone's WLAN settings by touching
[OPEN Settings].
• In your smartphone's WLAN settings, search for
the Hama SIRIUM2000AMBT/SIRIUM2100AMBT
loudspeaker.
Note
• The loudspeaker generates its own WLAN network
bearing the name SIRIUMSetup and the rst six digits
of the MAC address. (e.g. SIRIUMSetup_E69EBB) This
WLAN does not require a password.
• Connect your smartphone with the loudspeaker.
• Now return to the Hama Smart Audio App on your
smartphone.
• Select the required WLAN name (SSID) with which you
wish to connect the loudspeaker.
• Now also enter your network key if necessary and
con rm with [Save].
• Con rm the selected settings by touching [CONFIRM].
• The loudspeaker now connects to the network. After
successful con guration, "Loudspeaker con gured
successfully" appears on the smartphone.
• The LEDs go out after a few seconds.
Note
• With iOS, the App may need to be closed and
restarted. Then follow the two steps below.
• The sound bar that has been set up should now appear
in the main menu. Press on the loudspeaker icon.
• Tap [Sources] at the bottom edge of the screen to
establish a connection with your Amazon account.
• Then touch the [Amazon Alexa] button.
• Touch [Sign in with Amazon] to open the web browser to
enter your access details.
Note
• If the Amazon Shopping App has already been installed
and set up on your smartphone, the following steps
are skipped.
• Using your smartphone's keypad, enter the access
details for your Amazon account and con rm your
entries with Login.
• Alternatively, tap [Create new Amazon account]
to create a new Amazon account.
• Following successful login, you will return to the Hama
Smart Audio app.
• Now choose the language to which Alexa is to respond
in future.