Bosch GRC Professional GRL 300 HV Originalbetriebsanleitung Seite 19

Ensure that the laser radiation area is guarded or
u
screened. Restricting the laser radiation to controlled
areas prevents eye injuries being caused to people who
are not using the laser measuring tool.
Always position the measuring tool such that the laser
u
beams travel far above or below eye level. This ensures
that no eye injuries are caused.
Avoid laser beam reflections on smooth surfaces such
u
as windows or mirrors. Even the reflected laser beam
can cause eye injuries.
Additional Safety Instructions
Do not use any optical instruments such as binoculars
u
or magnifying glasses to view the radiation source.
Doing so can damage your eyes.
Keep the magnetic accessories away from
implants and other medical devices, e.g.
pacemakers or insulin pumps. The magnets
in the accessories generate a field that can im-
pair the function of implants and medical
devices.
Keep the magnetic accessories away from magnetic
u
data storage media and magnetically-sensitive
devices. The effect of the magnets in the accessories can
lead to irreversible data loss.
Product Description and
Specifications
Please observe the illustrations at the beginning of this oper-
ating manual.
Intended Use
Rotary laser
The measuring tool is intended for establishing and checking
exactly horizontal height profiles, vertical lines, alignments
and plumb points.
The measuring tool is suitable for indoor and outdoor use.
GRL 250 HV:
This product is a consumer laser product in accordance with
EN 50689.
Remote control
The remote control is intended for controlling the Bosch
rotary lasers via infrared.
The remote control is suitable for indoor and outdoor use.
Product Features
The numbering of the product features refers to the illustra-
tion of the measuring tool and remote control on the graph-
ics pages.
Rotary laser
(1) Shock-warning function indicator
Bosch Power Tools
(2) Shock-warning button
(3) Status indicator
(4) On/off button
(5) Rotational operation button
(6) Variable laser beam
(7) Sensor for remote control
(8) Laser beam outlet aperture
(9) Plumb point up
(10) Rotation head
(11) Line operation button
(12) Battery warning
(13) Battery compartment
(14) Locking mechanism of the battery compartment
(15) 5/8" tripod mount
(16) Serial number
(17) Laser warning label
(18) Label laser aperture (GRL 300 HV/GRL 300 HVG)
Remote Control
(19) Remote control
(20) Rotational operation button
(21) Line operation button
(22) Shock-warning reset button
(23) Button for clockwise rotation
(24) Button for anticlockwise rotation
(25) Signal transmission indicator
(26) Infrared beam outlet aperture
(27) Serial number
(28) Battery compartment cover locking mechanism
(29) Battery compartment cover
Accessories/replacement parts
a)
(30) Laser receiver
a)
(31) Measuring rod
a)
(32) Tripod
(33) Fastening screw for wall mount
(34) Fixing holes for wall mount
(35) 5/8" tripod mount for wall mount
(36) Wall mount/alignment unit
a)
(37) Alignment unit bolt
(38) 5/8" screw for wall mount
a)
(39) Magnet
a)
(40) Laser viewing glasses
a)
(41) Laser target plate
a)
(42) Case
a) Accessories shown or described are not included with the
product as standard. You can find the complete selection of
accessories in our accessories range.
English | 19
a)
a)
a)
a)
a)
1 609 92A 8LJ | (07.06.2023)