Werbung
Verfügbare Sprachen
Verfügbare Sprachen
b.
Use power tools only with specifically designated battery packs. Use of any other
battery packs may create a risk of injury and fire.
When battery pack is not in use, keep it away from other metal objects, like paper
clips, coins, keys, nails, screws or other small metal objects that can make a
connection from one terminal to another. Shorting the battery terminals together
may cause burns or a fire.
d.
If liquid contacts eyes, additionally seek medical help. Liquid ejected from the
battery may cause irritation or burns.
e.
Under abusive conditions, liquid may be ejected from the battery; avoid contact. If
contact occurs, flush with water. If liquid contacts eyes, additionally seek medical
help. Liquid ejected from the battery may cause irritation or burns.
6. Service
a.
Have your power tool serviced by a qualified repair person using only identical
replacement parts. This will ensure that the safety of the power tool is maintained.
Additional Safety for Battery-Operated Drills
WARNING
Important: It is imperative to follow all national safety regulations concerning installa-
tion, operation and maintenance.
a.
DO NOT allow anyone under the age of 18 years to use this tool, and ensure that
operators are qualified and familiar with the operating and safety instructions
b.
Battery chargers are for indoors use only. Ensure that the power supply and
charger are protected against moisture at all times.
c.
When using the drill, use safety equipment including safety glasses or shield, ear
defenders, and protective clothing including safety gloves. Wear respiratory
protection suitable for the work being undertaken. A minimum rating of FFP2 is
recommended. If operating the tool causes discomfort in any way, stop immedi-
ately and review your method of use.
d.
Use metal and voltage detectors to locate concealed electric, water or gas lines.
Avoid touching live components or conductors.
e.
Ensure that the lighting is adequate.
f.
Ensure that the drill bit is securely fixed in the chuck. Insecure drill bits can be
ejected from the machine causing a hazard
g.
Ensure that the drill bit is not in contact with the workpiece prior to starting up the tool.
h.
Before drilling, check that there is sufficient clearance for the drill bit under the
workpiece.
i.
DO NOT exert pressure on to the tool. To do so would shorten its service life.
- 07 -
Werbung
