Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Note
Both the drill and the charger contain no user-serviceable parts. If the device does
not perform as outlined in this manual, return it to an authorised GMC service centre
for repair
General inspection
● Regularly check that all the fixing screws are tight
● Inspect the supply cord of the tool, prior to each use, for damage or wear. Repairs
should be carried out by an authorised service centre. This advice also applies to
extension cords used with this too.
Cleaning
● Keep your tool clean at all times. Dirt and dust will cause internal parts to wear quickly,
and shorten the machine's service life. Clean the body of your machine with a soft
brush, or dry cloth. If available, use clean, dry, compressed air to blow through the
ventilation holes
● Clean the tool casing with a soft damp cloth using a mild detergent. Do not use
alcohol, petrol or strong cleaning agents
● Never use caustic agents to clean plastic parts
Lubrication
Slightly lubricate all moving parts at regular intervals with a suitable spray lubricant
Storage
Store this tool carefully in a secure, dry place out of the reach of children
Disposal
Always adhere to national regulations when disposing of power tools that
are no longer functional and are not viable for repair.
Do not dispose of power tools, or other waste electrical and electronic
equipment (WEEE), with household waste
Contact your local waste disposal authority for information on the correct
way to dispose of power tools
- 15 -
Werbung
